Material · Carbon, Alloy & Tool Steels
Tool Steel D2
The cold-work die standard: 60 HRC, extreme abrasion resistance, semi-stainless chemistry.
Price index: $$$
Material properties
| Parameter | Value |
|---|---|
| Tensile strength | — (specified by hardness) |
| Yield strength | — (specified by hardness) |
| Hardness | 58–62 HRC (hardened) |
| Density | 7.70 g/cm³ |
Choose it when
The default for high-volume blanking and forming tooling: massive chromium carbides grind away abrasion for hundreds of thousands of cycles. Rough-machine annealed, harden, finish by EDM/grinding.
Look elsewhere when
Toughness is only moderate — shock-loaded edges chip; choose A2 (or S7) for interrupted or impact duty. Semi-stainless at best: store oiled or coated in humid climates.
Compatible finishes
As-Machined
The baseline finish: straight off the machine, fastest and cheapest.
Black Oxide
Black with zero dimensional change: the gauge-and-tool finish for precision steel.
PTFE Coating (Teflon)
The slippery armor: fluoropolymer for low friction, non-stick release and chemical inertness.
Laser Marking
Permanent identification with zero dimensional change: serials, logos and codes burned in, not stuck on.
Typical applications
- Blanking and piercing punches
- Forming and coining dies
- Shear blades and slitting knives
- Wear plates and gibs
Compared with similar grades
| Property | Tool Steel D2 | Low-Carbon Steel 1018 | Carbon Steel 1045 | Structural Steel A36 |
|---|---|---|---|---|
| Tensile strength | — (specified by hardness) | 440 MPa (cold drawn) | 625 MPa (cold drawn) | 400–550 MPa |
| Yield strength | — (specified by hardness) | 370 MPa (cold drawn) | 530 MPa (cold drawn) | 250 MPa (min) |
| Hardness | 58–62 HRC (hardened) | 126 HB | 179–229 HB | ~120 HB |
| Density | 7.70 g/cm³ | 7.87 g/cm³ | 7.85 g/cm³ | 7.85 g/cm³ |
| Price index | $$$ | $ | $$ | $ |
| Machinability | 2/5 | 4/5 | 3/5 | 4/5 |
Have a part in mind?
Upload your CAD file and get a price range in about 60 seconds. NDA-protected from the first byte.
Get instant estimate