Fabvector Process
Injection Molding
Complex plastic part production with AI-assisted cooling analysis, gate optimization, and mold-flow simulation. From bridge aluminum tooling to full production steel molds with conformal cooling and hot runners.
Tolerance
±0.05mm
Lead Time
12–35 days
Cost Range
$0.50–50/pc
Capabilities
Max Part Size
800×600mm mold base
Min Wall Thickness
0.8mm
Surface Roughness (Ra)
SPI A2–B3
Supported Materials
ABS
Polycarbonate (PC)
PC-ABS
Nylon PA6/PA66
Polypropylene (PP)
POM (Acetal)
PEEK
PEI (Ultem)
Surface Finishes
SPI A1 Mirror
SPI A2 High Polish
SPI B1 Semi-Gloss
SPI C1 Matte
Texture MT11010
Texture MT13020
Custom Etch
DFM Tips
- 1Maintain uniform wall thickness (variation under 15%) to prevent sink marks and warpage.
- 2Add 1–2° draft angle on all vertical faces for clean ejection from the mold.
- 3Keep ribs at 50–70% of the adjacent wall thickness to prevent sink on the opposite face.
- 4Avoid undercuts unless side-actions are budgeted—consider redesigning with snap fits instead.
Frequently Asked Questions
Ready to get started?
Get an instant AI-powered quote or create a formal RFQ for injection molding.