Service
Carbon Fiber Machining
CNC-routed carbon-fiber sheet parts with delamination control, clean holes and optional sealed edges.
Capabilities
| Parameter | Value |
|---|---|
| Stock form | Flat carbon-fiber laminate sheet |
| Operations | CNC routing, drilling, countersinking and trimming |
| Tooling | Diamond-coated tooling with dust extraction |
| Edge control | Delamination inspection; edge sealing by RFQ |
| Best geometry | Flat plates, frames, arms and sandwich-panel details |
| Quote route | Manual engineering review |
Typical applications
- Drone frames, arms and payload plates
- Robot links and lightweight structural plates
- Optical, metrology and test-fixture plates
- Motorsport panels, brackets and electronics trays
Carbon Fiber Machining buyer questions
Q-01Does the published carbon-fiber service include molded 3D composite parts?
The published scope is CNC routing, drilling, countersinking and trimming of flat carbon-fiber laminate sheet. Autoclave layup, molded shells and complex 3D composite tooling are separate capabilities that must be confirmed during engineering review; they should not be inferred from the sheet-machining page.
Q-02How does FabVector control delamination and dust when machining carbon fiber?
The route uses sharp diamond-coated tools, supported entry and exit surfaces, controlled feeds and local dust extraction. Hole edges and routed profiles are inspected for breakout and delamination; cosmetic or moisture-sensitive parts can add edge sealing in the RFQ.
Q-03What carbon-fiber parts are a good fit for CNC routing?
Flat drone frames, robot links, optical plates, electronics trays, test fixtures and motorsport panels are strong fits. Threads, deep 3D pockets and bearing seats usually need bonded inserts, an aluminum interface or a different process; send the assembly context so those interfaces are designed before cutting.
Related pages
CNC Machining
Milling, turning, 5-axis, Swiss-type, EDM and grinding under one roof — one upload, one accountable partner.
CNC Milling
3- and 4-axis vertical machining for housings, brackets, manifolds and structural parts.
CNC Turning
Live-tooling lathes for shafts, pins, bushings and threaded fittings up to Ø406 mm.
5-Axis Machining
Simultaneous 5-axis machining for impellers, freeform surfaces and compound-angle features.
Have a part in mind?
Upload CAD or drawings. Eligible CNC work gets an instant estimate; other processes move to engineer review. NDA-protected from the first byte.
Start an RFQ