Surface Finish · Plating
Tin Plating
The solder-friendly finish: tin for bus bars, terminals and food-contact hardware.
Process specifications
| Parameter | Value |
|---|---|
| Process group | Plating |
| Coating thickness | 5–20 µm |
| Tolerance impact | Adds roughly the coating thickness per surface with typical electroplate edge build-up; thin enough to ignore on most non-precision hardware, but mask press-fit and toleranced features. |
| Corrosion rating | Moderate — primarily prevents oxidation and preserves solderability rather than providing structural corrosion protection. |
| Appearance | Matte gray-white or bright silvery tin. |
⚠ Not suitable for
Fine-pitch electronics where tin whiskers can short circuits (pure bright tin is the worst offender — specify matte tin or ask about whisker mitigation); high-temperature joints above ~150 °C (tin softens and creeps); wear surfaces (tin is soft and smears under load).
Works on these materials
Typical applications
- Copper bus bars and power connection faces
- Electronic terminals and solderable contacts
- Food-equipment hardware needing a non-toxic plated surface
Related engineering guides
copper CNC machining
Copper CNC Machining for Thermal and Electrical Parts: C110, Burrs and Plating
A practical copper CNC machining guide for busbars, heat spreaders, cold plates, RF parts and high-conductivity components.
EV battery copper busbar CNC machining
EV Battery Copper Busbar CNC Machining: C110, Burr Control and Tin Plating
RFQ guide for EV battery copper busbar CNC machining: C110 copper, high-current terminals, burr control, plating, hole quality and inspection.
copper C110 busbar CNC machining
Application Case: Copper C110 EV Busbar and Power Electronics Terminal
A copper busbar CNC machining RFQ playbook covering conductivity, burr control, plating, hole quality and inspection.
Have a part in mind?
Upload CAD or drawings. Eligible CNC work gets an instant estimate; other processes move to engineer review. NDA-protected from the first byte.
Start an RFQ